• 2-1/4" structural silicone-glazed (SSG) mullions and intermediate horizontal framing members
• 18 mm wide polyamide nylon thermal strut for energy efficiency and condensation resistance
• Easy-to-install captured head and sill “can” receptors - Flush SSG sill and jamb receptors are available
• No exterior unit wet sealing required; pressure-equalized, rain screen design
• Less than 0.06 cfm/sqft air infiltration at 6.24 psf
• 15 psf water test pressure; static and dynamic
• Full AAMA 501 test protocol including interstory vertical and horizontal movement; thermal cycling

• 2 1/2”, 3 1/2” and 4 1/2” frame depth with polyamide thermal barrier
• AAMA AW-100 Performance Class

• 4 1/2” frame depth with polyamide thermal barrier
• AAMA AW-100 Performance Class

• Wausau’s flagship curtainwall product line
• 4 3/4”, 6 1/4”, 7 1/4”, 8 1/4” or 10 1/4”  frame depths
• Several frame depths including cladding for steel tubes
• 2 1/2” or 3” exterior sight line - Many accent covers available
• 3/8” thermal separation

• Several frame depths including cladding for steel tubes
• Grid frames are factory fabricated and shipped knocked-down (KD) for field assembly
• All grid framing is interchangeable with standard Wausau SuperWall^TM systems
• Carrier frames are factory four-side structural glazed in a controlled environment

• Best-in-class thermal performance lowers operating costs and reduces necessary HVAC capacity
• Condensation resistance for high humidity occupancies
• 2 1/2” exterior sightline
• Accepts triple insulating glass

• 2 7/8”, 3 7/8” and 4 7/8” frame depth with extra-wide polyamide thermal barrier
• AAMA AW-100 Performance Class

• 3-7/8" (3250i) and 4-7/8" (4250i) frame depth
• 24mm XLT polyamide thermal barrier
• ­AAMA AW-100 Architectural Performance Class

• 6-1/4", 6-1/2" and 7-1/4" frame depth with polyamide thermal barrier
• Narrow 2 1/2” mullion sightlines
• Transitions seamlessly from curtainwall to window wall
• Pressure-equalized rain screen design
• 15 psf static and dynamic water resistance

• 3 11/16” frame depth with 44mm GFR polyamide thermal barrier and non-out-gassing polyolefin cavity fillers
• AAMA AW-100 Performance Class
• Best-in-class R6 fixed and R5 operable thermal performance.

• Engineered to meet typical institutional buildings’ span and wind load requirements
• Interlocking frame design accommodates seismic, live load and thermal building movements
• Two lines of defense against air and water infiltration- Pressure-equalized rain screen design
• Water control and drainage at each unit
• Two-level thermal barrier frames (7250i-UW) or thermally-improved (7250-UW)

• Profiled perimeter glazing rebates to match existing putty-glazed windows
• AAMA AW-100 Architectural Performance Class - Grids designed for project-specific wind loads
• 2-7/8" frame depth with polyamide thermal barrier (8300i Series)
• Mechanically fastened frame and true divided-lite (TDL) muntin grid construction

• 2 7/8”, 3 7/8” and 4 7/8” frame depth with extra-wide polyamide thermal barrier
• AAMA AW-100 Performance Class
• Beveled, cove, ogee or square exterior face to replicate putty-glazed window profiles
• Equal sightline option at vents and fixed lites (2250i-XLT)

• Designed for compliance with GSA ISC Security Design Criteria and Department of Defense UFC 4-010-01 requirements
• Blast performance exceeding 10 psi peak pressure, 89 psi-msec impulse
• Accepts a variety of security glazing types
• Interlocking frame design accommodates seismic, live load and thermal building movements
• Pressure-equalized rain screen design

• Control solar heat gain and harvest natural daylight to meet sustainable design goals
• A variety of pre-engineered configurations and types
• Extruded blades, perforated sheet, “catwalk” grids or solid shading
• Modular design and integral alignment features for ease of installation

3250-Z Series

• 3 1/4” frame depth with polyurethane or polyamide thermal barrier

4250-Z Series

• 4” frame depth

• Fluted or beveled perimeter glazing rebates to match existing putty-glazed windows
• AAMA AW-80 Architectural Performance Class - Grids designed for project-specific wind loads
• 5-7/16" frame depth with polyurethane thermal barrier

• 3-1/4" frame depth 
• 18 mm, 22 mm and 38 mm XLT polyamide thermal barriers
• Can accommodate different interior and exterior finishes
•  AAMA AW-50 Architectural Performance Class rating
• 0.060" to 0.080" extrusion wall thickness

• 4-1/2" frame depth 
• 24 mm and 38 mm XLT polyamide thermal barriers
• Can accommodate different interior and exterior finishes 
• AAMA AW-45 Architectural Performance Class or optional AW-80 rating
• 0.060" to 0.090" extrusion wall thickness

• 4” frame depth with polyamide nylon thermal barrier
• AAMA AW-120 air, water and structural performance
• Fixed or side-hinged in-swing casements for cleaning or custodial ventilation
• Mitered and corner-blocked frame and vent construction

• Minimal frame depth to fit within existing window frame openings
• Enhances thermal and acoustical performance of weather-tight existing windows
• Side-hinged access doors with custodial locks
• 5/8” or 1” between-glass Venetian blinds available

• 4 1/2” frame depth with polyamide thermal barrier – Integrates with other Wausau products
• AAMA AW-60 (single) AW-50 (French) Performance Class
• In-swing or out-swing operation

• 5-7/8" frame depth for high spans and wind loads; polyamide thermal barrier
• Half-slide, end-slide, center-slide, and center-open two-track configurations side-stack with INvent™ fixed lites